Household installation wires

Household installation wires

АПВнг-LS

Single-core wire with aluminum sheath, with PVC insulation, flame-retardant, with low smoke and gas emission.

Structure Application Characteristics
  • Conductor core – aluminum, single-wire or multi-wire, cross-section from 2 mm2 to 16 mm2 (Class 1),
  • cross-section from 25 mm2 to 120 mm2 (Class 2)
  • Insulation made of polyvinyl chloride plastic (PVC).

Color – on request.

Designed for laying in steel pipes, hollow channels of building structures, on trays, etc., for installation of electrical circuits. Wires are used for electrical installations during stationary laying in lighting and power networks, as well as for installation of electrical equipment, machines, mechanisms and machine tools for a nominal voltage of up to 450 V (for networks up to 450/750 V) with a frequency of up to 400 Hz or a constant voltage of up to 1000 V.

Range: during installation up to -150C; during operation from -50 0C to +700C; heating of cores: not higher than +700C. Bending radius (minimum): not less than 10 wire diameters. Service life at least 15 years.

Nominal cross-section (mm²)

Estimated wire diameter

(mm)

 

Estimated weight of 1 km of wire

(kg) 

 

Electrical resistance of conductors, no more than (Om/km)

АПВ / АПВнг-LS

2,5

3,4

15

12,100

4

3,9

21

7,410

6

4,4

28

5,110

10

5,6

46

3,080

6

7,1

72

1,910

25

                        8,8

                      112

1,200

35

                       10,0

                      145

0,868

50

                       11

                      197

0,641

70

                    13,5

                     267

0,443

95

                    15,8

                   367

0,320

120

                 17,4

                   447

0,253

Download PDF

АПВВнг-LS

Single-core wire with aluminum sheath, with PVC insulation, flame-retardant, with low smoke and gas emission.

Structure Application Characteristics
  • Conductor - conductive, single-wire aluminum (class 1)
  • Insulation made of polyvinyl chloride plastic (PVC). The insulation is applied to parallel cores with a separate base. One of the cores has a distinctive longitudinal convex stripe.
    Color - on request

APPV - multi-core wire with aluminum conductors, with PVC plastic insulation, flat, with a separate base.

APPV - multi-core wire with aluminum conductors, with PVC plastic insulation, flat, with a separate base.

APPVng-LS - Multi-core wire with aluminum conductors, with PVC plastic insulation, flat, with a separate core, non-flammable, with low smoke emission.

Designed for electrical installations with stationary laying in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools with a nominal voltage of up to 450 V (for networks up to 450/750 V) with a frequency of up to 400 Hz or a constant voltage of up to 1000 V for rigid installation.

Range: during installation up to -150C; during operation from -50 0C to +700C; heating of cores: not higher than +700C. Bending radius (minimum): not less than 5 wire diameters. Service life at least 15 years.

Nominal cross-section (mm²)

 

 

Estimated wire diameter (mm)

Estimated weight of 1 km of wire (kg) 

 

Electrical resistance of the cores, slightly more (Ohm/km)

АППВ / АППВнг-LS

                2 x 2,5

          3,9 x 9,0

32

              12,100

                 2 x 4

           4,4 x 10,0

43

                7,410

                 2 x 6

           4,9 x 11,0

58

                5,110

                3 x 2,5

          3,9 x 14,1

48

                12,100

                 3 x 4

           4,4 x 15,6

64

                 7,410

                 3 x 6

          4,9 x 17,1

86

                 5,110

Download PDF

ПВ1 / ПВ-3 / ПВ1нг-LS / ПВ3нг-LS

Single/multi-core copper wire with PVC insulation

Structure Application Characteristics
  • Conductor core – copper, single-wire or multi-wire, for cross-sections from 0.5 mm2 to 10 mm2 (Class 1) for cross-sections from 16 mm2 to 95 mm2 (Class 2) (PV1)
  • Copper conductor multi-wire for cross-sections from 0.5 to 1.5 mm2 (class 3 or 4), class 4 for cross-sections from 2 to 4 mm2, class 3 for cross-sections from 5 mm2 and above (PV-3)
  • Insulation – polyvinyl chloride plasticate (PVC).

Colors are made to order.

PV-1 - Multi-core wire with copper conductors, with PVC plastic insulation, flat, with a separate core

PV-3 - Wire with a copper conductor, with PVC plastic insulation, increased flexibility.

PV1ng-LS - Single-core wire with a copper conductor, with PVC plastic insulation of reduced fire hazard.

PV3ng-LS - Wire with a copper core, with PVC plastic insulation of reduced fire hazard, increased flexibility.

Wires are used for electrical installations with stationary laying in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools with a rated voltage of up to 450 V (for networks up to 450/750 V) with a frequency of up to 400 Hz or a constant voltage of 1000 V. The PV brand wire is intended for laying in steel pipes, hollow channels of building structures, on trays, etc., for the installation of electrical circuits.

The PV1ng-LS wire is intended for laying in steel pipes, hollow channels of building structures, on trays, etc., for the installation of electrical circuits, with increased fire safety requirements.

Range: during installation up to -150C; during operation from -50 0C to +700C; heating of cores: not higher than +700C. Bending radius (minimum): not less than 10 wire diameters. Service life at least 15 years.

Nominal cross-section (mm²)

 

 

Estimated wire diameter

(mm)

 

Estimated weight of 1 km of wire (kg)

Electrical resistance of wires, not more than (Ohm/km)

ПВ-1 / ПВ1нг-LS

    

0,5

2,0

8

36,000

0,75

2,2

11

24,500

                   1

2,3

15

18,100

1,5

2,8

22

12,100

2,5

3,4

35

7,410

                   4

3,9

52

4,610

                   6

4,4

75

3,080

10

6,1

124

1,830

16

7,1

198

1,150

25

8,8

                      312

0,727

35

                       10,0

                      420

0,524

          50

11,7

570

0,387

                70

13,5

698

0,268

          95

15,8

964

0,193

ПВ-3 /ПВ3нг-LS

              0,5

2,1

8

39,600

               0,75

2,3

11

25,500

                 1

2,5

14

21,800

                1,5

3,1

21

14,000

                2,5

3,7

34

7,490

                 4

4,3

49

4,790

                 6

4,7

70

3,110

               10

6,5

116

1,990

             16

8,1

182

1,210

            25

10,5

272

0,809

              35

11,4

365

0,551

               50

13,3

540

0,394

               70

15,0

706

0,277

              95

18,1

1 004

0,203

Download PDF

ПВС

PVA Wire with twisted cores, with PVC insulation, with PVC sheath, flexible, for voltage up to 380 for 380/660 V systems

Structure Application Characteristics
  • Conductive copper stranded core.
  • Insulation - polyvinyl chloride plastic (PVC).
  • Insulated cores are twisted.

Sheath made of polyvinyl chloride plastic (PVC).

PVS wire is most often used in everyday life to connect electrical appliances and power tools: refrigerators, washing machines, microwave ovens, as well as small mechanization tools in gardening and horticulture. PVS power cable is used as an extension cord for voltages up to 380 V/50 Hz and for 380 V/660 V systems.

Temperature range: during operation from -40 0С to +400С; test voltage 2kV. Nominal voltage: 380/360 V. Service life not less than 6 years.

Nominal cross-section (mm²)

 

Estimated wire diameter

(mm)

Estimated weight of 1 km of wire

(kg) 

Electrical resistance of the wires (Ohm/km)

пвс

2*0,75

6,4

58

26,000

1*1,0

6,7

67

19,500

2*1,5

7,7

89

13,000

2*2,5

9,6

141

7,980

3*0,75

6,8

69

26,000

3*1,0

7,1

79

19,500

3*1,5

8,4

110

13,300

3*2,5

10,3

175

7,980

4*0,75

7,4

83

26,000

4*1,0

7,9

100

19,500

4*1,5

9,4

37

13,000

4*2,5

11,3

212

7,980

5*0,75

8,3

101

26,000

5*1,0

8,7

118

19,500

5*1,5

10,5

167

13,300

5*2,5

12,61

258

7,980

Download PDF

ППВ/ППВнг-LS

Wire with twisted cores, with PVC insulation, with PVC sheath, flexible, for voltage up to 380 for 380/660 V systems

Structure Application Characteristics
  • Core - copper conductor, single-wire (class 1)
  • Insulation made of polyvinyl chloride plastic (PVC).
    Insulation is applied to parallel laid cores with a separate base. One of the cores has a longitudinal distinctive convex stripe. Color - on request

PPV- Multi-core wire with copper cores, with PVC plastic insulation, flat, with a separate base

PPVng-LS- Multi-core wire with copper cores, with PVC plastic insulation, flat, with a separate base, non-flammable, with low smoke and gas emission.

Designed for electrical installations with stationary laying in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools with a nominal voltage of up to 450 V (for networks up to 450/750 V) with a frequency of up to 400 Hz or a constant voltage of up to 1000 V for rigid installation.

Range: during installation up to -150C; during operation from -50 0C to +700C; heating of cores: not higher than +700C. Bending radius (minimum): not less than 10 wire diameters. Service life at least 15 years.

Nominal cross-section (mm²)

 

Estimated wire diameter

(mm)

 

Estimated weight of 1 km of wire (kg)

 

Electrical resistance of the cores not more than (Ohm/km)

 

ППВ

 

       2 x 0,75

2,6 x 6,4

22

24,500

24,500

              2 x 1,0

2,8 x 6,8

27

18,100

18,100

       2 x 1,5

3,3 x 7,8

40

12,100

12,100

             2 x 2,5

3,9 x 9,0

63

7,410

7,410

       2 x 4

4,4 x 10,0

92

4,610

4,610

           3 x 0,75

                  2,6 x 10,2

33

24,500

24,500

       3 x 1,0

         2,8 x 10,8

41

18,100

18,100

              3 x 1,5

                  3,3 x 12,3

59

12,100

12,100

        3 x 2,5

        3,9 x 14,1

94

7,410

7,410

                3 x 4

                   4,4 x 15,6

138

4,610

4,610

 

 

ППВнг-LS

 

             2 x 0,75

                 2,6 x 6,4

                     25

24,500

 

              2 x 1

                 2,8 x 6,8

   32

18,100

 

               2 x 1,5

                 3,3 x 7,8

                      46

12,100

 

              2 x 2,5

                3,9 x 9,0

72

7,410

 

              2 x 4

               4,4 x 10,0

                     106

4,610

 

               3 x 0,75

              2,6 x 10,2

37

24,500

 

              3 x 1

             2,8 x 10,8

                       47

18,100

 

              3 x 1,5

            3,3 x 12,3

68

12,100

 

               3 x 2,5

            3,9 x 14,1

                      108

7,410

 
Download PDF

ШВВП

Wire with twisted cores, with PVC insulation, with PVC sheath, flexible, for voltage up to 380 for 380/660 V systems

Structure Application Characteristics

Conductive copper stranded conductor.

  • Insulation - polyvinyl chloride plastic (PVC).
  • Housing - insulated parallel
  • Sheath made of polyvinyl chloride plastic (PVC).

Sheath color - white/black

SHVVP wires are most often used in everyday life to connect machines and appliances for household and similar applications to networks with a nominal alternating voltage of up to 380 V for 380/380 V systems. For connecting personal hygiene and microclimate devices, electric soldering irons, lamps, electronic kitchen equipment, extension cords, washing machines, refrigerators and other similar devices operated in residential and administrative premises.

Temperature range: during operation from -40 0С to +400С; test voltage 2kV. Nominal voltage: 380/360 V. Service life not less than 6 years.

Nominal cross-section (mm²)

 

Rated current load, not more than A

 

Estimated external dimensions

Height*width,mm

Estimated mass of 1 km of cord, kg

ШВВП

2*0,5

2,5

3,1*5,0

25,5

2*0,75

6,0

3,3*5,4

31,5

    2*1,0

10,0

3,7*6,0

40,5

2*1,5

16,0

4,1*7,2

54,2

2*2,5

25,0

4,7*8,3

79,1

2*4,0

32,0

5,3*9,4

110,3

2*6,0

45,0

6,5*11,7

174,9

3*0,5

32,0

5,3*9,4

110,3

3*0,75

45,0

6,5*11,7

174,9

3*1,0

10,0

3,7*8,3

59,1

3*1,5

16,0

4,1*9,5

78,6

3*2,5

25,0

4,7*11,5

116,8

3*4,0

32,0

5,3*13,0

163,5

3*6,0

45,0

6,5*16,3

260,2

Download PDF

Product

АПВнг-LS
АПВВнг-LS
ПВ1 / ПВ-3 / ПВ1нг-LS / ПВ3нг-LS
ПВС
ППВ/ППВнг-LS
ШВВП